Conditions of absorption and repair
Since the presence of an absorption dryer can have many advantages and benefits for compressors and pneumatic devices, it is necessary to pay attention to various points and factors in its maintenance. In the maintenance of dryers, the following points should be taken into account: ▪️ Timely replacement of the electric valves of the device ▪️ Timely replacement of the input and output microfilter elements of the device
▪️ Timely replacement of the absorption dryer Using suitable absorbent materials in the dryer (activated alumina (aluminum oxide), silica gel (sodium silicate) and molecular sieve (zeolite)) ▪️ Monitoring and supervising the dew point of absorption dryer. ▪️ Muffler, solenoid valve switch, air dryer filter element, pressure, temperature and set time of the device, device inlet filters and solenoid valve diaphragm should be controlled and checked.
نکات مربوط به استفاده و تعمیر درایرهای جذبی
When repairing or using absorption dryers, one should pay attention to various points and parameters, the most important of which include the following: ▪️ To repair the dryer, use the main and original parts. ▪️ At the time of repair, the sources of pressure must be cut off and the pressure must be discharged. ▪️ The pressure, temperature and time set for regeneration after repairing and maintaining the device should be controlled. ▪️ Inlet filters without automatic draining must be emptied regularly.
▪️ Check the operation of the turret solenoid valve switch. ▪️ The silencer of the dryer must always be cleaned.
▪️ The air filter element must be controlled. ▪️ The inlet and outlet filters of the device should be controlled and if necessary, the cartridge should be replaced.
▪️ One-way valves, electric valves or butterfly valves should be checked and cleaned. ▪️ Diaphragm related to electric valve and one-way valve should be replaced after one year. ▪️ The replacement of moisture absorbent materials should be done based on the quality of the air.